HARDWARE

 

Grade 10.9 Bolt Kit With Washers & Dowel Pins Code: AGKBK Price: $10.00 Sorry, we are currently sold out of 'Grade 10.9 Bolt Kit With Washers & Dowel Pins'. Please check back later. Quantity in Basket: none Fits GX160 & GX200. The stock side cover and head bolts are grade 5 and will stretch causing flex and misalignment between parts. The grade 10.9 bolts are much stronger. Highly recommended for big horsepower and high rpm applications.

Grade 10.9 Bolt & Stud Kit with Washers & Dowel Pins Code: AGKBSK Price: $25.00 Available for delivery Quantity in Basket: none Fits GX160 & GX200. The stock side cover and head bolts are grade 5 and will stretch causing flex and misalignment between parts. The grade 10.9 bolts and studs are much stronger. This kit includes studs for the cylinder head and bolts for the side cover. We use bolts on the side cover because the studs will interfere with the chain guard and chain. Highly recommended for big horsepower and high rpm applications.

Dowel Pin Code: AGKG2MB91 Price: $3.00 Available for delivery Quantity in Basket: none Dowel pin for GX160/200 side cover. Reduces case flex on high output motors. Helps prevent leaking side covers. CHANGE QUANTITY TO 2 FOR ONE SIDE COVER.

Head Stud Code: AGKG1DV84 Price: $5.00 Available for delivery Quantity in Basket: none Head stud for GX160/200. Price is for one stud. Change quantity to 4 for one engine. You will also need 8mm bolt and flat washer.

Key Stock, 3/16 x 3/16 x 1/2 Code: AGKZ8498 Price: $0.50 Available for delivery Quantity in Basket: none Key stock 3/16" x 3/16" x 1/2". Used with clutch on output shaft.

Key Stock 3/16 x 3/16 x 3/4 Code: AGKZ8454 Price: $0.32 Available for delivery Quantity in Basket: none Key stock size 3/16 x 3/16 x 3/4.

Pulse Fitting Code: AGKMPF Price: $3.00 Available for delivery Quantity in Basket: none Pulse fitting used on our carburetor adaptors. 1/4" thread size, 1/8" NPT

Set Screw 1/4 x 28 x 1/4 Code: AGKZ8470F Price: $0.30 Available for delivery Quantity in Basket: none 1/4" x 28 x 1/4" Set screw used with the Max Torque Clutch. Clutch accepts 2 set screws.

Bolt, Cap Head M6x1.00x20mm Code: AGKM3529 Price: $0.50 Available for delivery Quantity in Basket: none Cap head bolt. Thread: M6x1.00 Length: 20mm Grade: 12.9 Used to bolt carb adaptors to cylinder head on GX160/200's.

Bolt, Cap Head M8x1.25x25mm Code: AGKM4204 Price: $0.50 Available for delivery Quantity in Basket: none Cap head bolt. Thread size: M8x1.25 Length: 25mm Grade: 12.9 Used to bolt headers to GX160/200's. Some engines also have an M8 thread size for the chain guards.

Bolt, M6 x 1.00 x 30mm Code: AGKM3602 Price: $0.25 Available for delivery Quantity in Basket: none Socket head cap screw grade 12.9. M6 x 1.00 x 30mm

Bolt, Cap Head M6x1.00x16mm Code: AGKM3487 Price: $0.50 Available for delivery Quantity in Basket: none Cap head bolt. Thread size: M6x1.00 Length: 16mm Grade: 12.9 Used for valve cover on GX160/200's.

Bolt, Hex Head 5/16-24x3/4 Code: AGKM6073 Price: $0.50 Available for delivery Quantity in Basket: none Hex head bolt. Thread size: 5/16-24 Length: 3/4 Grade: 8 Used on output shaft of GX160/200's to secure clutch. Also used on 99cc Predator output shaft.

Washer, Split Lock, 5/16" Code: AGKM4810 Price: $0.25 Available for delivery Quantity in Basket: none 5/16" lock washer. Use with output shaft bolt.

Bolt, 5/16-24x1 Code: 1752 Price: $0.50 Available for delivery Quantity in Basket: none Fine thread bolt 5/16-24x1. Used on 99cc Predator to mount jackshaft to side cover.

Bolt, Hex Head 5/16-18x3/4 Code: AGKM6070 Price: $0.50 Available for delivery Quantity in Basket: none Hex head bolt. Thread size: 5/16-18 Length: 3/4 Grade: 8 Used for chain guard on some engines. Other engines have an M8 thread size for the chain guard bolts.

Bolt, Hex Head 1/4-20x5 Code: AGKM5304 Price: $2.00 Available for delivery Quantity in Basket: none Hex head bolt. Thread size: 1/4-20 Length: 5" Grade: 8 Used for the 390 carb kit (with insulator). Secures carb adaptor, insulator, 390 carb & filter adaptor.

Bolt, Hex Head 1/4-20x4-1/2 Code: AGKM5296 Price: $2.00 Available for delivery Quantity in Basket: none Hex head bolt. Thread size: 1/4-20 Length: 4-1/2" Grade: 8 Used for 390 carb kit (without insulator). Secures carb adaptor, 390 carb & filter adaptor.

Bolt, Hex Head 1/4-20x1 Code: AGKM5106 Price: $0.50 Available for delivery Quantity in Basket: none Hex head bolt. Thread size: 1/4-20 Length: 1" Grade: 8 Used to secure 22mm Mikuni to carb adaptor.

Nut 1/4-28 Code: AGKM2928 Price: $0.25 Available for delivery Quantity in Basket: none 1/4-28 nut. Used with our conduit retainers.

Bolt, Hex Head M6x1x12mm Code: AGKM3440 Price: $0.50 Available for delivery Quantity in Basket: none Hex head bolt. Thread size: M6x1 Length: 12mm Grade: 8.8 Used in our throttle linkage kits to secure "L" bracket.

Bolt, Hex Head M8x1.25x30mm Code: AGKM7367 Price: $0.75 Available for delivery Quantity in Basket: none Hex head bolt. Thread size: M8x1.25 Length: 30mm Grade: 10.9 Used for the side cover on GX160/200's.

Bolt, Hex Head M8x1.25x55mm Code: AGKM7565 Price: $1.00 Available for delivery Quantity in Basket: none Hex head bolt. Thread size: M8x1.25 Length: 55mm Grade: 10.9 Cylinder head bolt for GX160/200's.

Washer, Flat M8 Code: AGKM3049 Price: $0.25 Available for delivery Quantity in Basket: none Flat washer for M8 bolts.

Nut M6x1 Code: AGKM5920 Price: $0.25 Available for delivery Quantity in Basket: none M6 nylon insert lock nut.

Nut 1/4-20 Code: AGKM2035 Price: $0.25 Available for delivery Quantity in Basket: none 1/4-20 nylon insert locknut.

Washer, Flat 1/4 Code: AGKM9619 Price: $0.25 Available for delivery Quantity in Basket: none Flat washer for 1/4" bolts.

Washer, Split Lock 1/4 Code: AGKM0336 Price: $0.25 Available for delivery Quantity in Basket: none Split lock washer for 1/4" bolts.

Nut M8x1.25 Code: AGKM6648 Price: $0.25 Available for delivery Quantity in Basket: none M8x1.25 nut.

Washer, Flat 5/16 Code: AGKM9627 Price: $0.25 Available for delivery Quantity in Basket: none Flat washer for 5/16" bolt. Used on output shaft to secure clutch on GX160/200 engines. Also used on 99cc Predator.

Hose Clamp Code: AGKMHC Price: $1.00 Available for delivery Quantity in Basket: none Hose clamp used to secure our 1/4" fuel line to the carburetor inlet. Minimum diameter is 7/32". Maximum diameter is 5/8".

Carburetor Stud Code: ARC1345 Price: $1.55 Sorry, we are currently sold out of 'Carburetor Stud'. Please check back later. Quantity in Basket: none Stock GX200 carb stud. The 212cc Predator has one short stud and one standard length stud. Replace the short stud on the 212 with this stud to allow the use of an air filter adapter.