ENGINE ACCESSORIES

Chain Deflector Code: 0528 Price: $7.50 Available for delivery Quantity in Basket: none This chrome chain deflector has universal mounting holes which allows it to adapt to most small engines. Fits the 6.5hp engines, 79cc Harbor Freight engine and the 99cc Predator.

Aluminum Chain Guard Code: SMACGS Price: $19.00 Available for delivery Quantity in Basket: none Aluminum chain guard, light weight, high quality. Fits GX160 & GX200.

Chain Guard, Clutch Cover Code: AGKPCG Price: $44.95 Sorry, we are currently sold out of 'Chain Guard, Clutch Cover'. Please check back later. Quantity in Basket: none Pro Mod aluminum chain guard/clutch cover. The clutch bolt was tearing up my shoe until I installed this guard. Excellent quality. Easy to install.

Spark Plug NGK Code: SMBP6ES Price: $4.00 Available for delivery Quantity in Basket: none NGK spark plug bp6es.

Spark Plug Boot Code: hon30700 Price: $5.00 Available for delivery Quantity in Basket: none Honda spark plug boot. High tension for better spark.

Recoil Handle Code: hon28461 Price: $1.65 Available for delivery Quantity in Basket: none Recoil handle.

Recoil Rope Code: hon28462 Price: $3.85 Available for delivery Quantity in Basket: none Recoil rope.

Recoil Starter Code: HON28400 Price: $19.00 Available for delivery Quantity in Basket: none Genuine Honda recoil starter for GX160 & GX200's. Quality material is used in this durable recoil starter. Thick metal prongs engage the flywheel pulley giving you positive engagement for consistent starts. When your clone recoil starter breaks this is an excellent replacement. Color will vary depending on stock.

Tach, Mini with RPM Recall Code: V722 Price: $37.99 Available for delivery Quantity in Basket: none Here's a great little tach that provides engine rpm and max rpm recall. An affordable, compact and great looking tach! Tach is approximately 2" wide and 1" tall.

Tach, Stealth Go Kart Code: V734 Price: $129.95 Available for delivery Quantity in Basket: none This is our alternative to expensive go kart tachs. The stealth tach provides rpm's, cylinder head temp and speed. Mounting the tach to a go kart steering wheel will require some two way tape or fabricating a bracket. The speed sensor also requires fabricating a bracket. The tach kit comes with a magnet which you secure to the sprocket of your go kart. You need to mount the provided sensor 1/4" from the magnet to get your speed. If you cannot fabricate a bracket for the sensor you still get a high quality tach with cylinder head temp. Tach is approximately 4 1/2" wide and 2 1/2" tall. Easy to read display.

Billet Side Cover, Dual Bearing, GX200 Code: ARC6057 Price: $139.98 Available for delivery Quantity in Basket: none Introducing ARC's New Dual Bearing Billet Sidecover. The long anticipated Billet Sidecover for the GX200 / Clone Engine has arrived. It has the attention to detail and good looks that have come to be expected of ARC's billet products. It features side by side dual ball bearings that support the crank and gives it another fulcrum point to help eliminate any crankshaft flexing. It has an integral o-ring along the perimeter in it's machined groove that guarantees a good seal. 4 solid pin receptacles mate with solid dowels to increase mating shear strength. Ball bearing support for camshaft main increases strength and minimizes potential for wear. It has 2 venting holes at the top with 1/8" NPT Plugs. It also has 2 oil fill ports with billet ARC aluminum hand tighten plugs. Another useful feature is the threaded holes over the side dowel -pins so that small bolts (included) can be used to push the side cover for easy removal. The side cover comes with all needed hardware and crank seal. Important Due to variations in clone blocks, you may find that the side cover is not quite lining up with all four dowell pins. Try removing the bottom dowell pin if you encounter difficulty.

Windage Tray Code: AGKRR228 Price: $35.00 Available for delivery Quantity in Basket: none Bolt in this windage tray to reduce oil aeration or foaming and oil sloshing in high speed cornering. Intended for engines using a stock side cover and an ARC connecting rod. Works in GX160/200 and 212cc Predators.

Pushrod Tightening Tool Code: AGKRR280 Price: $15.00 Available for delivery Quantity in Basket: none Custom tool to the S2 adjustable push rods for tightening the jam nut. The tool works perfectly in a vice to tighten around the push rod so the jam nut can be torqued.

Piston Dead Stop Code: AGKRR282 Price: $25.00 Available for delivery Quantity in Basket: none A must have for anyone assembling and building engines. The billet aluminum piston dead stop can be used with any motor with a 14mm spark plug. The piston dead stop screws into the spark plug hole and aids in finding true top dead center with a degree wheel. It is also an essential tool for torquing and removing a flywheel nut.

Drain Plug Bolt Code: hon90131 Price: $1.50 Available for delivery Quantity in Basket: none Drain plug bolt. Fits Honda GX160/200.

Drain Plug Washer Code: hon90601 Price: $1.45 Available for delivery Quantity in Basket: none Drain plug washer. Fits GX160/200.

Oil Filler Cap Code: hon15600 Price: $1.45 Available for delivery Quantity in Basket: none Oil filler cap with dip stick. Fits Honda GX160/200.