GX160 & GX200 PERFORMANCE PARTS

GX340 & GX390 PERFORMANCE PARTS

GX240 & GX270 PERFORMANCE PARTS

GX120 PERFORMANCE PARTS

ENGINES

GO KARTS

MINI BIKES

MOTORIZED BIKES

MORE PRODUCTS

Sign In
212cc Predator

 

Air Filter Adapter fits Predator
Code: ARC6931
Price: $14.00
Available for delivery
Quantity in Basket: none
This adapter allows you to use one of our high flow (2 7/16" or 2 1/2") air filters on your Predator. Fits both 212cc Predator engines (new and old).

Carburetor Stud
Code: ARC1345
Price: $1.55
Available for delivery
Quantity in Basket: none
Stock GX200 carb stud. The 212cc Predator has one short stud and one standard length stud. Replace the short stud on the 212 with this stud to allow the use of an air filter adapter. Fits both 212cc Predator engines (new and old). Also needed for the Power Horse 6.5hp engine.

Predator Connecting Rod
Code: ARC6254
Price: $83.95
Available for delivery
Quantity in Basket: none
Stock length (3.308") billet connecting rod for the 212cc Predator. Billet rods are required in modified engines as the stock rod is the weakest link in the engine. Rod comes with bearings and installation instructions. Fits both 212cc Predator engines (new and old).

Long Rod (3.595") with Wiseco Flat Top Piston
Code: ARC6236P94
Price: $173.00
Sorry, we are currently sold out of 'Long Rod (3.595") with Wiseco Flat Top Piston'. Please check back later.
Quantity in Basket: none
This long rod uses a .490" wrist pin so you can use the Wiseco piston. Rod is 3.595" long. Do not need to mill the top of the piston with this rod. Piston is hone to fit. Some customers do not need to hone the stock bore while others are honing .003". Rings and wrist pin included. Fits both 212cc Predator engines (new and old).

Long Rod (3.708") with Wiseco Flat Top Piston
Code: ARC61PFT
Price: $189.00
Available for delivery
Quantity in Basket: none
This Predator connecting rod uses a .490 wrist pin to work with the Wiseco piston. Long rod at 3.708". This is a hone to fit piston. You will need to hone the cylinder approximately .003". The piston also needs to be milled for a zero deck height. You will end up milling approximately .050". The hone and milling amounts vary from engine to engine. Includes rings and wrist pin. Fits both 212cc Predator engines (new and old).

Cam, Custom Ground, .265" lift, Modified
Code: AGKCAM265P
Price: $50.00
Sorry, we are currently sold out of 'Cam, Custom Ground, .265" lift, Modified'. Please check back later.
Quantity in Basket: none
This cam has been ground specifically for the 212cc Predator engine only. We use the popular .265" lift grind. Cam requires 18lb valve springs or lighter. Use with stock or aftermarket carbs. Great cam for the price! Fits original 212cc Predator engines (pre June 2013). The new 212cc Predator (hemi head version) uses the Honda camshafts.

Cam, Custom Ground, .275" lift
Code: AGKCAM275P
Price: $100.00
Sorry, we are currently sold out of 'Cam, Custom Ground, .275" lift'. Please check back later.
Quantity in Basket: none
This cam is designed for the 212cc Predator engine only. Use with 26lb or lighter springs. High revving, high output cam at a great price! Must upgrade your valve train to use this cam. Fits original 212cc Predator engines (pre June 2013). The new 212cc Predator (hemi head version) uses the Honda camshafts.

Cam, Custom Ground, .308" lift
Code: AGKCAM308P
Price: $100.00
Sorry, we are currently sold out of 'Cam, Custom Ground, .308" lift'. Please check back later.
Quantity in Basket: none
The 308 cam is great for high output Predator's. Use with upgraded valve train and big intake valve. Need to clearance the bottom of the cylinder for this cam. Great cam for the most powerful Predator's. Fits original 212cc Predator engines (pre June 2013). The new 212cc Predator (hemi head version) uses the Honda camshafts.

Head Gasket, Copper, Fits 212cc Predator
Code: HG275
Price: $15.00
Sorry, we are currently sold out of 'Head Gasket, Copper, Fits 212cc Predator'. Please check back later.
Quantity in Basket: none
This copper head gasket fits the 212cc Predator. It's .016" thick. Designed to fit the origianl 212cc Predator engines (pre June 2013). The new 212cc Predator (hemi head version) has smaller head dowels.

Gasket, Cylinder Head, Copper, 2.77"-.016"
Code: HG277
Price: $15.00
Sorry, we are currently sold out of 'Gasket, Cylinder Head, Copper, 2.77"-.016"'. Please check back later.
Quantity in Basket: none
This cylinder head gasket works with the 2.77" piston in GX160/200's. Copper head gaskets work great for high compression application. Install the gasket dry and use factory torque settings. This gasket has a 2.77" bore size and is .016" thick. This gasket also works on the new "Hemi Head" Predator.

ARC Billet Flywheel, Predator
Code: ARC6625
Price: $105.00
Sorry, we are currently sold out of 'ARC Billet Flywheel, Predator'. Please check back later.
Quantity in Basket: none
This billet flywheel is the same as ARC6619 except the taper has been machined to match the Predator crank shaft. Great flywheel for modified 212cc Predator engines. Fits the original 212cc Predator (pre June 2013).

Billet Flywheel, New 212cc Predator
Code: ARC6626
Price: $105.00
Available for delivery
Quantity in Basket: none
Billet flywheels are a must for any 212cc Predator making good power. This flywheel fits the new 212cc Predator (hemi head version) from Harbor Freight.