BOLT SIZE CHART

GX160/200

	Cylinder head intake bolts. M6 x 20 1.00 pitch Used for bolting our carb adaptor to the cylinder head.

	Cylinder head exhaust bolts. M8 x 25 1.25 pitch Used for bolting a header to the engine.

	Output shaft bolt. 5/16"-24 x 3/4" fine thread Used to secure the clutch on the crank.

	Chain guard bolts. 5/16"-24 x 3/4" fine thread Used to bolt chain guard to engine. We have found that some engines use M8 x 20 1.25 pitch bolts for the chain guard.

Bolt sizes will vary between Honda's and the different clones available. Use this information as a guide only.

Our bolt kit & bolt/stud kit do not include the bolts above.

HOW TO:

TECHNICAL DATA:

BUILD UPS: