 |
Heres a list of mods for this clean Doodlebug: 304wx,
.290" lift cam,
14cc big valve head, 26lb springs,
chrome moly push rods and
mikuni fuel pump. Lots of power in a light weight mini bike!
|
 |
A license plate doubles as a rear fender on this mini bike. I'm not sure it this bike is street leagal, but it looks fun either way. |
 |
This is a beautifully refurbished Margay by Larry Wilkie. Some of Larry's work includes a 14cc head ported/milled, 18lb valve springs, stainless valves, retainers/keepers, lash caps, chrome moly pushrods, flat top piston, billet rod, modified AGK carb adaptor, 22mm Mikuni, advanced timing, candy cane header, top plate with fuel pump, a powder coated chassis with many new chassis parts. |
 |
Custom built pressure washer using a modified GX390. Notice the snake style header with a FMF silencer. |
 |
Luke Papworth from the UK and his race kart with a high output GX200. |
 |
This Azusa fun kart has been modified for two 6.5hp clone motors. Each motor has a 265M cam, billet rod, flat top piston, chrome moly pushrods, bored carb, aluminum flywheel and 14cc cylinder head among other things. Together the motors should be producing close to 30hp! |
 |
Check out the pin striping that went on this kart body. The fan shroud and chassis have been powder coated pink! |
 |
This is called a Bocart from Denmark. The GX200 has been upgraded with a billet rod, billet flywheel, 8 degrees advanced timing, flat top piston, 18cc big valve head that has been ported & milled, 276 cam, chrome moly pushrods, 1.2 ratio rockers, 390 carb and a custom exhaust. |
 |
This orange go kart was submitted by David Clements. His kart has been given the name "General (mini) Lee". |
 |
We've all thought about doing this. AGK customer Don Kyte did a nice job installing a pit bike motor into a shifter kart. This is a 160cc 4 stroke motor with a 4 speed transmission. The pit bike crowd tells us these motors are bullet proof and put out about 15hp. |
 |
It's nice to always have a cold one on hand. |
 |
Scotty from Canada builds these pit racers. His little creations will get you around the pitts in a hurry. |
 |
Steve in WI built this Doodlebug. The 6.5hp engine features govenor removal, 18lb valve springs, 2 stage custom header, K&N filter, 92 main jet, 4 degree timing key and a billet flywheel. Top speed is 41mph! |
 |
JD's drag bike. |
 |
Azusa mini bike. |
 |
Here is a Power Wheels Escalade with a GX motor! |
 |
Custom mini chopper with a V-Twin! |
 |
Clean mini bike with a yellow HF motor. |
 |
Beautifully restored mini bike. |
 |
Chovan in his #87 race kart. |
 |
James has nicknamed his Doodlebug, "No Fear". This mini bike features a built motor with front and rear disc brakes and has been clocked at 80mph!!! |
| |
|
| |
|
| |
|
| |
|
